How to Clean an Iron
TverLaws does not offer this service; however, here are some do-it-yourself ideas if you would like to learn how to clean an iron plate.
How much easier is it when the iron is clean and glides effortlessly across your shirts, slacks, and dresses? When the soleplates of irons get sticky or oily from dust, fabric softeners or the melting of synthetic fibers onto the soleplate, it's time to clean your iron. And fast.
Where to begin
Start with the owner's manual! If it's not in your files, it's usually a quick job to look it up online. What special instructions are there for your particular issue?
Beyond that, here are some common, green, family-friendly methods from TverLaws how to clean an iron soleplate:
Believe it or not, newspaper makes a great iron cleaner. Turn your iron up to the highest setting and turn steam off completely. Now run the hot dry iron across newspaper or paper toweling until it's clean. Still sticky? Sprinkle a tablespoon of salt on the newspaper, paper towel or dry cotton towel and repeat.
Make sure the iron is unplugged and completely cool. Wipe the soleplate with a clean rag dipped in vinegar. Then rinse with a soft rag dipped in water. Did it work? If not, try again with a rag dipped in ammonia. Dry with soft cloth or paper toweling. Done!
Mineral deposit build-up in the vents and on the face of the iron can take the steam out of your ironing. To clear, start with a homemade iron cleaner by making 2-1 mixture of baking soda and water, which will create a paste. Apply to the iron's soleplate, coating the areas with heavy mineral deposits and wipe off with a wet cloth. Then dip Q-tips in distilled water and insert the ends into the steam vents. Empty old reservoir water and add some distilled water and run on full steam. For extra cleaning power, mix 1/4 cup white vinegar and 3/4 cup distilled water. Your vents should be clean, and so should the soleplate. From now on, be sure to empty the steam reservoir after each use.